SMC Networks HRZD020-W1S-W1S, Руководство по эксплуатации

Страница: 90 / 129

HRX-OM-M005
Chapter 5 Product Operation
5.3 Operation Screen HRZD Series
5-46
5.3.28 CH1(2) Pump ECO Limit setting screen
The Pump ECO Limit Setting screen enables the setting of a limit to pump
performance. If the setting of the circulating fluid discharge pressure limit is valid,
the discharge pressure limit of the circulating fluid overrides the Pump ECO Limit.
Figure 5-76 “Pump ECO Limit Setting Screen”
Table 5-31 “Pump ECO Limit Setting Screen”
No. Item
Setting
range
Descriptions
Factory
default
1 [SEL] key ON, OFF
“P.E” is displayed in CNT on the Main screen and the
LIMIT value is displayed on the “Status screen 2” when
this is valid (set to ON).
OFF
2 [SET] key
―――
Used to display the “Ten-key screen”. 100%
3 [Enter] key ―――
Used to display the “MESSAGE screen” to accept the
setting.
－
4 [Initial] key ―――
Used to display the “MESSAGE screen” to initialize the
setting.
－
5 [Cancel] key
―――
Used to cancel the setting.
－
6 [Return] key ―――
Used to display the “CH1(2) control setting screen” on
page 5-44.
－
7 Output indicator
―――
This indicates the current output of the pump.
－
[Tips]
The setting of a LIMIT value takes effect only when the [ENTER] key is
touched with ON-OFF setting set to ON.
The indicator is designed to turn red when an output value exceeds the limit.
The setting range is displayed on the “Ten-key screen” with the touch of the
[SET] key.
5 6 4 3
1
2
7