SMC Networks HRZD020-W1S-W1S, Руководство по эксплуатации

Страница: 50 / 129

HRX-OM-M005
Chapter 5 Product Operation
5.3 Operation Screen HRZD Series
5-6
5.3.3 Special mode
The indicator lamp is designed to flash when the product goes into special mode,
as shown below.
Figure 5-6 “Main Screen”
Table 5-5 Special Mode
Indicator
lamp
Mode Descriptions
Pump up
Your piping is supplied with an insufficient amount of the circulating fluid at
product startup, and it is supplied with circulating fluid from the chiller.
Being Stopped The product is at halt, or the compressor is ready to stop (for approx. 30 sec).
Purging
Circulating fluid is being recovered from piping in your system with the
utilization of the circulating fluid automatic collection function.
Internal Pump up
Circulating fluid is being internally pumped to the main tank from the sub tank.
Product operation is disabled if this message is displayed.
Compressor ECO
Limit
The limiter is triggered, which limits the performance of the compressor.
See sections “5.3.27 CH1(2) Compressor ECO Limit setting screen” on page
5-45 for setting.
Pump ECO Limit
The limiter is triggered, which limits the performance of the pump.
See sections “5.3.28 CH1(2) Pump ECO Limit setting screen” on page 5-46
for setting.
The lamp comes on.
E.g.: “Being Stopped”