SMC Networks HRZD020-W1S-W1S, Руководство по эксплуатации

Страница: 51 / 129

HRX-OM-M005
Chapter 5 Product Operation
HRZD Series 5.3 Operation Screen
5-7
5.3.4 CH1(2) setting data screen 1, 2
Figure 5-7 “CH1(2) Setting Data Screen 1”
Figure 5-8 “CH1(2) Setting Data Screen 2”
Table 5-6 “CH1(2) Setting Data Screen 1, 2”
No. Item Descriptions
Factory
default
1 TEMP SP Allows the setting of circulating fluid discharge temperature in 0.1°C increments. 20°C
2 FLOW SP Allows the setting of circulating fluid discharge flow rate in 1L/min increments. 20LPM
3 TEMP BAND
*1
Allows the selection of the band width for TEMP SP in 0.1°C increments. 1.0°C
4 READY TIME
Allows the setting of time from when TEMP PV reaches the band range to when
[RDY] is displayed on the Main screen or Ready signal is output, by second.
300 sec
5 HIGH TEMP
Allows the setting of a temperature that causes “Reservoir High Temp WRN”
alarm, in 1°C increments. An alarm is raised when circulating fluid temperature
exceeds the set temperature.
93°C
6 LOW FLOW
“Discharge Low Flow WRN” alarm is raised when FLOW PV falls below the set
flow rate. The flow rate setting is allowed in 1L/min increments. Alarm is
disabled if the selection is “0”.
10LPM
－
[SET] key
Used to display the “Ten-key screen” on page 5-9, which allows numerical input
and setting.
－
－
[Next] key
The CH1(2) setting data screen 1, 2 are alternately displayed. The “CH1(2)
setting data screen 3” on page 5-8 is also displayed if the optional DI control kit
is provided.
－
－
[Return] key Used to display the “Main screen” on page 5-5.
－
[Tips]
The setting range of items is displayed on the “Ten-key screen” with the
touch of the [SET] key.
*1: See “8.5 BAND/READY Function” in Chapter 8Appendix on page 8-16 for
the TEMP BAND.
1
2
3
4
5
6