SMC Networks HRZD020-W1S-W1S, Руководство по эксплуатации

Страница: 84 / 129

HRX-OM-M005
Chapter 5 Product Operation
5.3 Operation Screen HRZD Series
5-40
5.3.24 CH1(2) analog output setting screen 1, 2
The “CH* analog output setting screen 1” can set output1 and the “CH* analog
output setting screen 2” can set output 2.
Figure 5-63 “CH1(2) Analog Output Setting Screen 1, 2”
Table 5-27 “CH1(2) Analog Output Setting Screen 1, 2”
No. Item Setting range Descriptions Factory default
OUTPUT 1 TEMP PV
1 TYPE
DI PV, DI SP, N/A,
TEMP PV, TEMP
SP, FLOW PV,
FLOW SP, PRESS Used to specify the type of analog output
signal.
DI PV, DI SP is displayed only if the DI control
kit (optional) is provided.
OUTPUT 2 FLOW PV
2 SCALING
―――
Used to specify the scaling of analog output
signal.
－
3 [V Lo] key
―――
Used to display the “Ten-key screen”.
0 V
(OUTPUT1,2)
4 [V Hi] key ――― Used to display the “Ten-key screen”.
10 V
(OUTPUT1,2)
5 [SEL] key ON, OFF
Output voltage remains larger than 0V when
this is valid (set to ON). OFF
(OUTPUT1,2)
6 [LIM] key
Used to set a limit for the output voltage range
(analog voltage output limiter).
The “Ten-key screen” is displayed.
10 V
(OUTPUT1,2)
7 [Enter] key
―――
Used to display the “MESSAGE screen” to
accept the setting.
－
8 [Initial] key
―――
Used to display the “MESSAGE screen” to
initialize the settings of TYPE, SCALING,
and LIMIT.
－
9
[Cancel]
key
――― Used to cancel the setting. －
10 [Return] key ―――
Used to display the “CH1(2)DIO
communication setting screen 1” on page
5-32.
－
[Tips]
The setting range of items is displayed on the “Ten-key screen” with the
touch of the [V Lo] or [V Hi] key.
A scaling must be specified to cause V Hi to be larger than V Lo (V Lo<V Hi).
9 10
1
8 7
3
4
5
6
2