SKYZER TECHNOLOGIES
PAGE 14 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
To complete the i3010 installation process:
7.
Reboot the i5100 terminal by pressing and releasing the shortcut keys
(
CHQ + SAV + CANCEL)
at the same time.
8.
The i3010 pinpad will now display
“PAYMARK EFTPOS”
which is its
standard idle screen.
NOTE:
If the above steps have been performed and the i3010 pinpad is still
displaying the step 6 screen, repeat step 7 again to re-synchronise the internal
keys between the i3010 pinpad and i5100 terminal.
In the unlikely event that the i3010 pinpad has not been synchronised with the
serial number, perform the steps below to complete the installation process:
9.
The i5100 terminal will prompt for the serial number of the i3010 pinpad to
be entered. Key the 10 digit serial number (found on the back of the
i3010 pinpad) into the i5100 terminal and press
ENTER.
10.
The i5100 terminal will prompt to re-enter the serial number and press
ENTER
.
NOTE:
When replacing an i3010 pinpad, ensure that the power supply to the
i5100 terminal is turned off. Unplug the i3010 pinpad cable from the RS232-1
port on the i5100 terminal and then proceed from step 2(as above).
PAYMARK
PAYMARK
PAYMARK
PAYMARK
EFTPOS
EFTPOS
EFTPOS
EFTPOS
Enter Serial Num
Enter Serial Num
Enter Serial Num
Enter Serial Num
Re
Re
Re
Re-
-
-
-enter Serial
enter Serial
enter Serial
enter Serial