SKYZER TECHNOLOGIES
PAGE 23 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
3.3 MULTI-MERCHANT CONFIGURATION
This function is used to configure the terminal for Multi-merchant operation. The
terminal can support up to 8 Merchants.
NOTE:
After activating the Multi-Merchant configuration, please return to
EFTPOS configuration
Function
3824
to enter the Terminal and Merchant ID’s for
the active merchants.
Step
Terminal Display
Description
1.0
Press
FUNC
2.0
FUNCTION?
FUNCTION?
FUNCTION?
FUNCTION?
Enter
7418
, press
ENTER
3.0
MULTI MERCHANT
MULTI MERCHANT
MULTI MERCHANT
MULTI MERCHANT
SETUP
SETUP
SETUP
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
4.0
ACTIVE MERCHANTS
ACTIVE MERCHANTS
ACTIVE MERCHANTS
ACTIVE MERCHANTS
12345678
12345678
12345678
12345678
Press 3 to Set Active Merchants
Enter the number (from 1 – 8) for each individual merchant you wish to activate
and press
ENTER
Example: To activate merchants 1 to 5, enter 12345
5.0
MULTI MERCHANT
MULTI MERCHANT
MULTI MERCHANT
MULTI MERCHANT
SETUP
SETUP
SETUP
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
6.0
MERCHANT 1 NAME
MERCHANT 1 NAME
MERCHANT 1 NAME
MERCHANT 1 NAME
MERCHANT 1
MERCHANT 1
MERCHANT 1
MERCHANT 1
Press 4 to Set Merchant Name
To change the merchant name, use the numeric keypad then the
FUNC
key to
access the alpha characters. Press
ENTER
to advance to the next merchant name
7.0
MULTI MERCHANT
MULTI MERCHANT
MULTI MERCHANT
MULTI MERCHANT
SETUP
SETUP
SETUP
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
8.0
DELETE CONFIG?
DELETE CONFIG?
DELETE CONFIG?
DELETE CONFIG?
ENTER=YES,CLR=NO
ENTER=YES,CLR=NO
ENTER=YES,CLR=NO
ENTER=YES,CLR=NO
Press 8 to Delete Terminal Configuration
To delete the Terminal Configuration press
ENTER
, otherwise press
CLEAR
and the
terminal will return to MULTI MERCHANT SETUP prompt