SKYZER TECHNOLOGIES
PAGE 24 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
8.1
ARE YOU SURE?
ARE YOU SURE?
ARE YOU SURE?
ARE YOU SURE?
ENTER=YES, CLR=NO
ENTER=YES, CLR=NO
ENTER=YES, CLR=NO
ENTER=YES, CLR=NO
Terminal will then prompt ARE YOU SURE? If yes, press
ENTER
and terminal will
immediately delete the terminal configuration and prompt you with the screen as
shown in 6.2.
If
CLEAR
is pressed then terminal will return to MULTI MERCHANT SETUP
8.2
ETSL EFTPOS
ETSL EFTPOS
ETSL EFTPOS
ETSL EFTPOS
MEMORY RESET
MEMORY RESET
MEMORY RESET
MEMORY RESET
This screen specifies that the terminals configuration has been deleted, and the
memory reset. This display will remain for a few seconds and then return to MULTI
MERCHANT SETUP prompt
9.0
MULTI MERCH
MULTI MERCH
MULTI MERCH
MULTI MERCHANT
ANT
ANT
ANT
SETUP
SETUP
SETUP
SETUP
Terminal is now in configuration mode. Press
CANCEL
to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
NOTE:
Multi-Merchant Top and Bottom Line Prompts are set by default and do not
usually require Editing.
Step
Terminal Display
Description
1.0
MULTI PROMPT 1
MULTI PROMPT 1
MULTI PROMPT 1
MULTI PROMPT 1
SELECT MERCHANT
SELECT MERCHANT
SELECT MERCHANT
SELECT MERCHANT
Press 1 to Edit Multi-Merchant Top Line Prompt
Terminal is preset to
“Select Merchant”
. To change use the numeric keypad then
the
FUNC
key to access the alpha characters
2.0
MULT
MULT
MULT
MULTI PROMPT 2
I PROMPT 2
I PROMPT 2
I PROMPT 2
ENTER 1
ENTER 1
ENTER 1
ENTER 1-
-
-
-8
8
8
8
Press 2 to Edit Multi-Merchant Bottom Line Prompt
Terminal is preset to
“Enter 1 – 8”
. To change use the numeric keypad then the
FUNC
key to access the alpha characters