SKYZER TECHNOLOGIES
PAGE 33 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
5.3 EXTRA TERMINAL FUNCTIONS
The terminal provides extra terminal functions which are accessible from the
Supervisor menu.
5 . 3 . 1
Xtra
Step
Terminal Display
Description
1.0
SUPERVISOR
SUPERVISOR
SUPERVISOR
SUPERVISOR
XTRA INIT DUPL
XTRA INIT DUPL
XTRA INIT DUPL
XTRA INIT DUPL
Press
ENTER
until
SUPERVISOR
menu is shown on the display.
Press
CHQ
key to select
XTRA.
2.0
SELECT MERCHANT
SELECT MERCHANT
SELECT MERCHANT
SELECT MERCHANT
ENTER 1 TO 8
ENTER 1 TO 8
ENTER 1 TO 8
ENTER 1 TO 8
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant.
3.0
TOM
TOM
TOM
TOM
ENTER to Select
ENTER to Select
ENTER to Select
ENTER to Select
Only applicable with Multi-Merchant setup.
Terminal will prompt whether correct merchant number has been entered and will
display
MERCHANT NAME
and
ENTER to Select
. Press
ENTER
to select
displayed merchant.
Press
CLEAR
or
CANCEL
to select a different merchant.
4.0
TERMINAL
TERMINAL
TERMINAL
TERMINAL
FUNCTIONS
FUNCTIONS
FUNCTIONS
FUNCTIONS
Select desired function from option table listed below by pressing the corresponding
number key to activate chosen option.
Example: Press 0 key to print stored transaction totals
NOTE:
Upon completion of desired function, terminal will return to idle screen.
Repeat steps 1-4 if required.
Press #
Terminal
Display
Description
PRESS 0: Print Stored Transaction Totals
PRINTING
PRINTING
PRINTING
PRINTING
Terminal will display
PRINTING
and will print a record of all stored
transactions awaiting transmission in the terminal.
PRESS 1: Terminal Restart
RESTART
RESTART
RESTART
RESTART
TERMINAL?
TERMINAL?
TERMINAL?
TERMINAL?
Press
ENTER
to restart the terminal
CANCEL
to return to idle prompt.
If
ENTER
key is pressed, terminal will restart and soon return to idle prompt.
PRESS 2: Display KVC and print Terminal Configuration
PRINTING
PRINTING
PRINTING
PRINTING
Terminal will display KVC and prompt to PRINT CONFIG Y/N.
If yes is selected,
PRINTING
displays while printing the configuration report.
If no is selected, terminal returns to admin menu.