SKYZER TECHNOLOGIES
PAGE 18 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
3.2 EFTPOS CONFIGURATION
The EFTPOS Configuration option enables the terminal to be configured to
operate as an EFTPOS terminal and must be done before the terminal can
process transactions.
For a multi-merchant terminal each merchant has its own configuration.
Step
Terminal Display
Comment
1.0
Press
FUNC
2.0
FUNCTION
FUNCTION
FUNCTION
FUNCTION?
?
?
?
Enter
3824
and press
ENTER.
3.0
CONFIG PARAMS?
CONFIG PARAMS?
CONFIG PARAMS?
CONFIG PARAMS?
ENTER OR CLEAR
ENTER OR CLEAR
ENTER OR CLEAR
ENTER OR CLEAR
ENTER
to configure the parameters,
CLEAR
to cancel and exit to idle prompt.
4.0
TERMINAL ID?
TERMINAL ID?
TERMINAL ID?
TERMINAL ID?
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
This parameter specifies the Terminal ID that ETSL assigns to the terminal.
Press
ENTER
.
5.0
MERCHANT ID?
MERCHANT ID?
MERCHANT ID?
MERCHANT ID?
XXXXXXXXX
XXXXXXXXX
XXXXXXXXX
XXXXXXXXXXX
XX
XX
XX
This parameter specifies the Merchant ID assigned by ETSL.
Press
ENTER
.
6.0
NII?
NII?
NII?
NII?
001
001
001
001
This parameter specifies the Network International Identifier (by default 001) that
the terminal uses to route messages to ETSL.
Press
ENTER.
7.0
COMMS MODE?
COMMS MODE?
COMMS MODE?
COMMS MODE?
1
1
1
1-
-
-
-DIAL
DIAL
DIAL
DIAL-
-
-
-UP
UP
UP
UP
To configure COMMS mode:
Press
1
for Dial-up configuration followed by
ENTER
and proceed with the
configuration as on page 19.
7.1
COMMS MODE?
COMMS MODE?
COMMS MODE?
COMMS MODE?
2
2
2
2-
-
-
-TCP
TCP
TCP
TCP-
-
-
-IP / Dial
IP / Dial
IP / Dial
IP / Dial
Press
2
for TCP-IP /Dial backup configuration followed by
ENTER
and proceed with
the configuration as on page 20 - 21.
7.2
COMMS MODE?
COMMS MODE?
COMMS MODE?
COMMS MODE?
3
3
3
3-
-
-
-TCP
TCP
TCP
TCP-
-
-
-IP
IP
IP
IP
Press
3
for TCP-IP configuration followed by
ENTER
and proceed with the
configuration as on page 22