SKYZER TECHNOLOGIES
PAGE 13 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
2 . 2 . 4
Installation of an i3010 Pinpad
To add an i3010 pinpad to an i5100 terminal, follow the steps below:
1.
Ensure that the power supply to the i5100 terminal is turned off.
2.
Plug the pinpad cable into the i3010 pinpad port.
3.
Plug the pinpad cable into the RS232-1 port on the i5100 terminal.
4.
Turn the power supply to the i5100 terminal back on.
5.
The 2 phase synchronisation process between the i3010 pinpad and
i5100 terminal will begin automatically. The following screens will appear
on the i3010 pinpad display during the synchronisation process.
6.
At the conclusion of the synchronisation process, the i3010 pinpad will
display:
Keys Phase 1
Keys Phase 1
Keys Phase 1
Keys Phase 1
Synchronization
Synchronization
Synchronization
Synchronization
Keys
Keys
Keys
Keys Phase 2
Phase 2
Phase 2
Phase 2
Synchronization
Synchronization
Synchronization
Synchronization
I3010 P
I3010 P
I3010 P
I3010 PCI 02.09
CI 02.09
CI 02.09
CI 02.09
1234
1234
1234
1234-
-
-
-D
D
D
D
Connects to
Terminal RS232-1
Connects to pinpad