SKYZER TECHNOLOGIES
PAGE 21 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
20.0
PABX?
PABX?
PABX?
PABX?
1A
1A
1A
1A
Press
ENTER
to bypass if no PABX prefix is required.
This parameter specifies the PABX numbers that the terminal dials to access an
outside line.
Note:
The terminal pauses for 1 second after dialling if a control character
‘A’
is
inserted after the PABX number. To insert a control character
‘A’
, press the
corresponding number key
2
and then the
FUNC
key.
21.0
HOST PHONE NO?
HOST PHONE NO?
HOST PHONE NO?
HOST PHONE NO?
08797
08797
08797
08797
This parameter specifies the phone Number of the ETSL Host.
Press
ENTER.
22.0
SAVE CONFIG Y/N
SAVE CONFIG Y/N
SAVE CONFIG Y/N
SAVE CONFIG Y/N
Terminal prompts to save configuration. Press
ENTER
to save configuration on the
terminal or
CLEAR
to exit and return to idle screen.
23.0
START TCP
START TCP
START TCP
START TCP-
-
-
-IP Y/N?
IP Y/N?
IP Y/N?
IP Y/N?
Terminal prompts to start TCP-IP (broadband) connection. Press
ENTER
to start
TCP-IP connectivity or
CLEAR
to exit without starting TCP-IP.
