EN
9. Cleaning
- 84 -
951-180-076-EN
Version 0y
9. Cleaning
9.1 Cleaning agents
Only cleaning agents compatible with the
materials can be used for cleaning (see
Chapter 2.3 for materials).
Always completely remove resi-
due of the cleaning agent on the
product and rinse with clear wa-
ter. This prevents the formation
of alkaline deposits.
WARNING
Electric shock
Perform cleaning work only on products that have been de-energized and depressurized. Do not touch cables or electrical compo-
nents with wet or moist hands. Use steam-jet equipment or high-pressure cleaners only in accordance with the IP protection class of
the pump. Otherwise, electrical components may be damaged.
Cleaning, required personal protective gear, cleaning agents, and equipment are in accordance with the current operating rules of the
operator.
9.2 Exterior cleaning
• Mark and secure wet areas.
• Unauthorized persons must be kept
away.
• Thoroughly clean all external surfaces
with a moist cloth.
The reservoir must be kept
closed during cleaning.
9.3 Interior cleaning
The interior normally does not need to be
cleaned. The interior of the product must
be cleaned if incorrect or contaminated lu-
bricant is accidentally filled. Please contact
SKF Customer Service.
9.4 Cleaning capacitive sensors
If the active sensor surface becomes con-
taminated, it must be cleaned with a cloth.
