Sirona orthophos xg 3, Руководство по установке

Страница: 107 / 142

Sirona Dental Systems GmbH 11 Appendix
Installation Instructions ORTHOPHOS XG 3 11.1 Service routines (for installation)
60 51 416 D 3352
D 3352.031.03.18.02
107
11.1.9Setting the minimum travel height (S018. 5)
1. Move the unit to the required minimum travel height by
pressing the
Up/Down keys in the user mode.
IMPORTANT
Programming the minimum travel height is possible only for
a system height that is below the lower correction switch lev
-
el (< position value of 1500)!
2. Select test step 2 in selection field 2 with the arrow
keys and confirm your selection by pressing the Ser
-
vice key .
The current height position is displayed in selection
field 1. The LED above the
Memory key is lit.
3. To save the minimum travel height, first press the Mem
-
ory key (the LED above the R key lights up), and
then the R key . .
IMPORTANT
The limitation of the minimum travel height is purely soft
-
ware based. The lower limit switch is not adapted to the new
minimum travel height.
• Quit service routine S018 (see page 101).
• Switch the unit OFF and restart it.
After the restart, the new minimum travel height is ac
-
tive.
2. 1.
3.
T R
Prog.
S
kV
mA

➊

1 2 3
S018_______5____

➊

➋

➊
R

➋

1 2 3
__200_mm________
R