Sirona orthophos xg 3, Руководство по установке

Страница: 52 / 142

5 Installation: Remote control Sirona Dental Systems GmbH
5.2 Mechanical installation Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
52
D 3352.031.03.18.02
For surface installation
3. Fasten the chassis firmly to the wall with the three
screws
C .
Shortening cable L117
4. If necessary, shorten cable L117 to the required length
and prepare it for reconnection.
– Expose the cable shield (see condition on delivery).
The length of the wires should be approx. 60 mm (2
3/8“).
– Place the shortened shielding over the insulation
and wrap the shielding with 3 layers of self-adhe
-
sive copper foil.
– Strip the wire ends 5 mm.
Crimp on the end sleeves.
Insert the orange, white-blue, blue
and white-orange wires
in separate end sleeves.
Attaching the strain relief
5. Attach cable L117 at the strain relief in the chassis
(concealed or surface installation).
– The cable length between the strain relief and the
stripped wire ends should be 200 mm (8“).
3.
C
5.
3x 4x30
Concealed installation
surface installation
4.
L117
Cable shield
60 mm
2 3/8“
10 mm
a p p r o x .
250 mm
from wall exit
3/8“