Sirona orthophos xg 3, Руководство по установке

Страница: 30 / 142

3 Installation: Panoramic X-ray unit Sirona Dental Systems GmbH
3.4 Installing the floor stand (option 2) Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
30
D 3352.031.03.18.02
CAUTION
For installation with the floor stand, the unit remains lying on
the pallet until the floor stand has been completely assem
-
bled. Only then may the unit be installed. For enhanced rep
-
resentation, some of the following drawings are shown in
the standing state.
1. Remove the surrounding packaging, the two lateral sty
-
rofoam parts and profile cover A .
NOTICE
The center styrofoam part should remain attached to the
unit for protection.
2. Loosen the nuts B (with washers) on both sides of the
pallet (or the wooden support). Take off the pallet (or
the wooden support). Remove the threaded bolt C .
IMPORTANT
The nuts D on the unit may remain inside the unit when the
threaded rods are removed. Remove the nuts.
3. Remove the carrying handles E on the lower side of the
pallet from the holders F .
4. Loosen screws G and remove the holders F .
3.4 Installing the floor stand (option 2)
1.
A
B
C
C
B
C
D
2. 4.
E
G
F
Must be dis -
mantled ly
-
ing on its
3.
E
F
F