Sirona orthophos xg 3, Руководство по установке

Страница: 121 / 142

Sirona Dental Systems GmbH 11 Appendix
Installation Instructions ORTHOPHOS XG 3 11.2 Adjusting the panoramic X-ray unit
60 51 416 D 3352
D 3352.031.03.18.02
121
11.2.6Adjusting the PAN diaphragm
IMPORTANT
The fixed diaphragm must be reattached for this adjustment
step (see page 113).
• Remove the needle phantom from the bite block holder
of the panoramic X-ray unit.
1. Go to the PAN
-
DIAPHRAGM submenu.
2. To make SIDEXIS XG ready for exposure:
Click
IMAGE ACQUISITION
The exposure dialog box showing the exposure status
appears in Sidexis.
The initialization status is visualized by a progress indi
-
cator on the Multipad.
The initialization procedure is completed when the ex
-
posure parameters of service routine S030.2
(60 kV / 3 mA; 0.2 s) are displayed and the progress in
-
dicator disappears.
3. Take an exposure (60 kV/3 mA):
– Press the R key on the Multipad to move the unit
back to the starting position. Press the release but
-
ton. Hold down the release button until image
acquisition is completed and the preview image
appears in the exposure dialog box.
1.
2.
in SIDEXIS
3.
T R
Prog.
S
kV mA
G
on the Multipad
6 0 / 3 0 . 2 0