Sirona orthophos xg 3, Руководство по установке

Страница: 24 / 142

3 Installation: Panoramic X-ray unit Sirona Dental Systems GmbH
3.3 Wall mounting (standard/option 1) Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
24
D 3352.031.03.18.02
• Remove profile cover A .
1. Position the two installation aids B at the foot C of the
device and secure their position with adhesive tape.
CAUTION! The installation aids must be placed on
top of each other in such a way that their openings
lie on top of each other
2. Set up the unit. To do this, tilt the transport pallet up -
right.
IMPORTANT
If you have transported the unit on the wooden support with -
out a pallet, set the unit upright with the wooden support.
You can also use the lateral styrofoam packaging as a sup
-
port with this variation.
3. Loosen the nuts B (with washers) on both sides of the
pallet (or the wooden support). Take off the pallet (or
the wooden support).
Remove the threaded bolts
C .
CAUTION
Remove the lower bolts first , followed by the upper bolts.
IMPORTANT
The nuts D on the unit may remain inside the unit when the
threaded rods are removed. Remove the upper nuts. The
lower nuts may remain in the unit.
3.
B
C
D