Sirona orthophos xg 3, Руководство по установке

Страница: 70 / 142

7 Initial startup Sirona Dental Systems GmbH
7.4 Checking the data paths Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
70
D 3352.031.03.18.02
3. Select/confirm the X-ray device:
Select e.g.
ROOM
3
and click OK .
IMPORTANT
The
SELECT X
-
RAY DEVICE
dialog appears only if several
X-ray devices are installed.
The dialog box for selecting the test type appears on
the screen.
4. Select/confirm the test type:
Click
SERVICE EXPOSURE .
The dialog box for selecting the service exposure ap
-
pears on the screen.
5. Select/confirm the service exposure:
Click
DIGITAL TEST PATTERN
– If several different X-ray components are available,
a dialog box for selecting the X-ray component
appears on the screen. In this case, select/confirm
the required component.
– If only one X-ray component is available, the expo
-
sure readiness dialog box appears on the screen
and shows the status of the exposure.
IMPORTANT
During operation in the service mode, the unit switches from
the user mode to the PC service mode logged by the PC.
The service mode is indicated by the
SERVICE
display on
the Multipad (see page 84).
The unit switches back to the user mode as soon as the ex
-
posure is completed.
3.
5.
4.