Sirona orthophos xg 3, Руководство по установке

Страница: 18 / 142

2 Delivery and transport Sirona Dental Systems GmbH
2.2 Transport to the installation site Installation Instructions ORTHOPHOS XG 3
60 51 416 D 3352
18
D 3352.031.03.18.02
NOTICE
If possible leave the packaging attached to the unit during
transport in order to protect it against damage.
1. Transport with packaging attached (normal case)
– Open the surrounding packaging at the tabs pro
-
vided for that purpose (A) , pull out the carrying
handles (B) , and transport the unit to the installa
-
tion site.
WARNING
When in transport position, the unit has a very high
center of gravity. Take care that the unit does not tip
over during transport.
2. Transport without pallet (exception)
IMPORTANT
If the pallet is too wide for transport to the installation site,
you may unscrew the pallet from wooden support
C and
transport the unit by means of the wooden supports without
the pallet.
To do this, proceed as follows:
– Remove the surrounding packaging, the two card
-
board boxes, as well as the two lateral styrofoam
parts.
– Loosen the four screws D .
NOTICE
The center styrofoam part should remain attached to the
unit for protection. If this is not possible, SIRONA recom
-
mends securing the tube assembly in its position with the
supplied strap prior to any further transport
(see the label on the styrofoam packaging)!
Tighten the strap only loosely. Do not stretch!
– Pull the carrying handles B out of their holders and
insert them through the drillings of the wooden sup
-
port C from the back.
– Insert screws D through the drillings E into the drill -
ings of the carrying handles to attach them firmly.
Long or short.
IMPORTANT
The carrying handles have rims which prevent them from
slipping out of the holes.
2.2 Transport to the installation site
1. 2.
A
B
short
long
C
D
D
E