Simrad SH80 - REV C, Руководство по установке

Страница: 78 / 200

Simrad SH80
62
851--164300 / C
→
Cable details on page 168.
Observe the following procedure for the connection of the USB
data cable.
1 Connect the quadratic USB connector to the Operating
Panel.
2 Connect the rectangular USB connector to the lowest USB
connector on the rear left hand side of the Sonar Processor
Unit.
Figure 21 Connections to
the rear side of the
Operating Panel
C8 / C9 C7
(CD5718)
USB-A
USB-B
C8 / C9 - Operating panel (Power and serial)
This is a special dual cable from the Operating Panel to the Sonar
Processor Unit and the Sonar Interface Unit.
This dual cable has a common 15-pin Delta connector in the
Operating Panel end, a 9-pin female Delta connector in the Sonar
Processor Unit end (cable C8), and a 9-pin male Delta connector
in the Sonar Interface Unit end (cable C9).
The cable is included in the standard delivery, and the cable length
is 4,5 meter.
→
Figure 21 shows the connections to the Operating Panel.
→
Cable details on page 169.
Observe the following procedure for the connection of the panel
cable.
1 Connect the 15-pin Delta connector to the Operating Panel.
2 Connect the 9-pin female Delta connector to the Serial A
connector on the rear side of the Sonar Processor Unit.
3 Connect the 9-pin male Delta connector to the J4 connector
in the Sonar Interface Panel.
C15 -Transceiver Unit
This is a data cable from the Sonar Interface Unit in the wheelhouse
to the Transceiver Unit in the sonar room. The cable is included in
the standard delivery, with a length of 100 meters.