Instruction Manual OilGuard Ex M
48
10241E/2
8
Packaging & transport
The original packaging materials should be used for packaging the photometer
and its peripheral components if possible. If the original packaging is no longer
available, note the following information:
Before packaging the photometer, close the openings of the photometer
with adhesive tape or plugs so that no packaging materials can enter the
instrument.
The photometer contains optical and electronic components. Make sure
that the packaging protects the instrument from damaging impact during
transport.
Package all peripheral devices and accessory parts separately and label
each part with the serial number of the photometer (
→
Section 1.4). This
prevents subsequent confusion and mix-ups while also making it easier to
identify parts.
When packaged in the way described above, the photometer can be
transported by the usual shipping methods and in all positions.
