Instruction Manual OilGuard Ex M
38
10241E/2
Action
3.
Remove the lock nut by turning it counter-
clockwise (bayonet connector) and then
pull out the inlet tube.
4.
Remove the protective tube (A).
5.
Mount the control unit and fix in place
with the two arrester nuts.
Use only the device-specific control
unit.
6.
The instrument must be at operating
temperature before recalibration
(
→
Section 1.5).
After recalibration of the
instrument, rebuild to the
initial state.
Action
Display (example)
Remarks
1.
Activate service
mode
* RECALIBR. *
* *
Section 4.4
Recalibration
