Instruction Manual OilGuard Ex M
36
10241E/2
Action
6.
Re-connect the electrical supply of the fan.
7.
Close the front door using the special wrench.
8.
Re-establish the voltage supply.
9.
Attach the supplied seal to the front door
(
→
Section 0).
Make a note of the seal number in the
maintenance protocol.
5.5
Recalibrating the photometer
After the photometer has been recalibrated, deviations from the previous
reading may result, since the instrument has to be re-set to a fixed reference
value.
Recalibration is performed with the SIGRIST control unit with built-in solid
particle reference.
Recalibration with
control unit
