Instruction Manual OilGuard Ex M
10241E/2
31
Action
6.
Check inlet tube and protective tube for
deposits and remove if necessary.
If an inlet tube is defective, it must be
replaced (
→
Section 6.2).
Do not remove deposits with a knife
or similar objects (use a soft material).
7.
Re-insert protective tube (A).
8.
Re-insert the inlet tube (A) and place the
lock nut in position.
Fix the inlet tube in place by turning the
lock nut clockwise (B).
9.
Place the cover onto the measuring cell
and fasten it with the two arrester
screws (arrows).
10.
Re-attach the sample feed and return
line.
