Instruction Manual OilGuard Ex M
8
10241E/2
The line between bilge separator and drain line must be as short as
possible! It must be ensured that the sample arrives at the photometer
within 15 s.
The discharge must be pressureless (do not use siphon or similar
components)
3.1.2
Installation of the free-fall measuring cell
Action
1.
Insert the protective tube (A) from above
into the measuring cell housing.
The pin on the protective tube (A)
must fit in the slot on the measuring cell
housing!
2.
Insert the inlet tube (B) into the
protective tube.
Free-fall measuring
cell KPFLJC PVDF
