SSG5000A RF Signal Generator User Manua
l
79 SSG5000A User Manual
Chapter 3
Application Examples
3.1 Output RF signal
Output an RF signal with frequency of 3GHz and amplitude of 0dBm from the
[RF
OUTPUT 50
Ω
]
connector.
1. Restore factory settings
a) Press
UTILITY
or the touch screen to set
UTILITY
->
Settings
->
Preset Type
->
Default
.
b) Press
PRESET
, or press
UTILITY
->
Preset
.
2. Set the Frequency
Press
FREQ,
and enter the 3GHz with the numeric keypad, or click the frequency on the
touch screen to pop up the keypad and input 3GHz.
3. Set the Level
Press
LEVEL
, and enter the 0dBm with the numeric keypad, or click the amplitude on the
touch screen to pop up the keypad and input 0dBm on the keypad.
4. Turn on RF output
Press
RF ON/OFF
or press the
HOME
key back to the main interface, select the RF block,
the white square on the left of ON to enable RF output. When enabled, the
RF ON/OFF
key backlight turns green and the RF state in the status bar changes to blue.
