SSG5000A RF Signal Generator User Manua
l
SSG5000A User Manual 18
2. Touch screen operation
Click on
RF
->
FREQ
->
Frequency
to enter the interface of RF output frequency setting.
⚫
Click the frequency parameter to pop up the keypad interface, and then click the
number symbol in the keypad to change the value. Click the unit to modify the unit.
Click the tick to confirm the modified value and selected unit.
Note:
The maximum RF output frequency is 20 GHz, and 9 kHz is the minimum.
Freq Offset
Setting the displayed frequency offset from the RF output signal.
This can be useful if the circuit or device shifts or alters the output frequency. Such as
when using an external mixer, by setting an offset
you can read the mixer signal’s
frequency directly on the RF generator front panel.
1. Keypad operation
Press
FREQ
->
Freq Offset
to make the focus fall on this parameter item.
⚫
Use the numeric keypad to input the desired value and press the unit button to select
the desired unit. Optional units are GHz, MHz, kHz, and Hz. Press
ENTER
to select
the current unit.
⚫
Press
ENTER
or press the knob to enter the parameter editing state, and then use
the left and right direction keys to move the cursor to the desired position. Press the
up and down direction keys, rotate the knob or press the numeric keypad to modify
the value. Press
ENTER
, knob or
ESC
to exit the editing mode.
2. Touch screen operation
Click
RF
->
FREQ
->
Freq Offset
to enter the interface of frequency offset setting.
⚫
Click the frequency offset parameter to pop up the keypad interface, and then click
the number symbol in the keypad to change the value. Click the unit to modify the unit.
Click the check mark to confirm the modified value and selected unit.
