SSG5000A RF Signal Generator User Manua
l
25 SSG5000A User Manual
Press
to empty the list.
6) Recall
Press
to enter the file recall page, select and open existing flatness correction files.
Please refer to "
" for details.
7) Save
Press
to enter the file save page, save the correction data in the list. Please refer to
" for details.
After entered into the set of flatness list filling, you can choose one of the following three
methods to fill flatness list with power sensor.
⚫
Flatness List
In the flatness list edit page, add the frequency list. Then enter the set of flatness list
filling, choose “Flatness List” method, and click “Fill Flatness with Sensor”. The
amplitude correction values in the flatness list will be generated.
⚫
Manual Step
Choose “Manual Step” method, several hidden options will be enabled. Edit these
options to generate frequency list, and then click “Fill Flatness with Sensor”;
amplitude correction values in the flatness list will be generated.
⚫
Sweep List
“Sweep List” method will generate frequency list according to the sweep list you have
edited in the RF Sweep function. And then you can click “Fill Flatness with Sensor”,
amplitude correction values in the flatness list will be generated.
Note:
⚫
You should connect a power sensor with the signal generator you use. Before you fill
the flatness list with sensor, there’s no need for you to turn on the RF state or sensor
state. Before or after “Fill Flatness with Sensor” executed, the RF state and sensor
