SSG5000A RF Signal Generator User Manua
l
SSG5000A User Manual 58
2. Logarithmic
In this mode, the frequency of the sweep signal varies in logarithmic steps. Unit: %.
2.6 Utility
System
Setting
1. Language
Set the display language of SSG5000A. SSG5000A supports Chinese/English menus,
help and interface display.
Press
UTILITY
->
Setting
->
Language
to expand drop down list, and then select the
desired language.
2. Screen Saver
Set the state of screen saver. When screen saver is switched on, the on-screen display
will turn off when there is no touch or key operation within the specified time. Click the
touch screen or press any key to resume.
Press
UTILITY
->
Setting
->
Screen Saver
to expand drop down list, and then select “off”,
“10 s”, “1 min”, “5 min”, “15 min”, “30 min”, “1 hour” or “2 hour”.
3. Power On
Set the type of parameter configuration to be loaded when the instrument startup.
Press
UTILITY
->
Setting
->
Power On
to expand drop down list, and then select “Default”
or “Last”.
Default: The default factory settings will be loaded when the instrument is powered on. For
