Configuration
62
Siemens Building Technologies
Fire Safety & Security Products
03.2007
Fig. 63
S.M.A.R.T. Setup screen
4.
Highlight
Enable
, and press the button to toggle between On and Off.
NOTE
If
Enable
is turned Off, you will not be able to make changes to any of the boxes.
5.
Highlight the box beside
Check Time
, and press the button.
Î
You can select from Monthly, Weekly and Daily. If you select Monthly, you will
be asked to set the Day of the Month and Time. If you select Weekly, you will
be asked to set the Day of the Week and Time. If you select Daily, you will be
asked to set the Time.
6.
Highlight the first box beside
Temperature Threshold
, and press the
button.
7.
Use the Up and Down arrow buttons to scroll through the numbers. Refer to
the hard disk drive manufacturer’s documentation for the correct temperature
setting.
Î
If the temperature of hard disk drive exceeds the defined threshold, the
system triggers an alert.
8.
Highlight the second box beside
Temperature Threshold
, and press the
button.
9.
Select either ºC (Celsius) or ºF (Fahrenheit), and press the
button.
The box beside
Last Check-Time
displays the Date and Time of the last
S.M.A.R.T. check.
10.
Highlight
OK
, and press the button to accept the changes.
Î
Selecting
Cancel
exits the screen without saving the changes.
11.
Highlight the
Actions
tab and the
System Event Actions
screen displays.
Fig. 64
System Event Actions screen
