Configuration
52
Siemens Building Technologies
Fire Safety & Security Products
03.2007
You can control event logging and remote notification of excessive number of
motions detected after the motion dwell time by adjusting the motion ignoring dwell
intervals.
Highlight the box beside
Motion Ignoring Interval
and press the button.
Î
A list of intervals ranging from 1 to 10 seconds or "Never" appears.
Î
The DVR will not log and notify motion events occurred during the preset interval
range.
NOTE
The record action for motion events will not be affected by the
Motion Ignoring
function.
Highlighting
Daytime Setup
and pressing the
button allow you to set up the
Daytime
range.
Fig. 50
Daytime Setup screen
1.
Highlight the box beside
Daytime
and press the button.
2.
Use the Up and Down arrow buttons to set the
Daytime
range.
Î
The DVR will consider the remaining time range as the Nighttime.
3.
Highlight the
Actions 1
and
Actions 2
tabs.
Î
The
Motion Detection Actions 1
and
Actions 2
screens display.
Fig. 51
Motion Detection Actions 1 screen
Actions 1
The DVR can be set to react to motion detection differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out connector,
sound the DVR’s internal buzzer, notify a number of different devices, and/or move
PTZ cameras to preset positions.
NOTE
You can associate multiple cameras with a camera that detects motion.
