Configuration
49
Siemens Building Technologies
Fire Safety & Security Products
03.2007
You can toggle the entire list On and Off by highlighting
Notification
and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the button.
6.
Highlight
OK
and press the button to accept your changes.
NOTE
For the
Notify
action, the notify item you select should be enabled in the
Notification
setup screen
and the DVR should be registered in the RAS (Remote Administration System).
Fig. 44
Alarm-In Action 2 screen
Actions 2
1.
Highlight the desired box under the
PTZ
heading, and press the button.
Î
A list of PTZ presets appear.
2.
Select the preset position for each PTZ camera, where you want PTZ
cameras to move to whenever the DVR detects an input on the associated
alarm input.
3.
Highlight the desired box under the
Spot Monitor
heading, and press the
button.
Î
A list of SPOT monitors and cameras appears.
Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects an input on
the associated alarm input.
Î
You can save your
Alarm-In
changes by highlighting
Save
and pressing the
button.
Î
Selecting
Cancel
exits the screen without saving the changes.
