Configuration
53
Siemens Building Technologies
Fire Safety & Security Products
03.2007
1.
Highlight the box under the
Record
heading and press the
button.
Î
A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the
DVR detects motion on the selected camera, it starts recording video from all
the associated cameras.
NOTE
For the
Record
action, the camera you select should be set to the Event or Time & Event recording
mode in the
Record Schedule
setup screen.
2.
Highlight the box under the
Alarm-Out
heading and press the
button.
Î
A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with that camera as you wish. When
the DVR detects motion on the selected camera’s input, it triggers output
signals on all the associated Alarm-Out connectors. You can also have the
DVR’s internal buzzer sound if motion is detected on the selected camera.
NOTE
For the
Alarm-Out
action, the alarm output and beep you select should be set to the Event mode in
the
Alarm-Ou
t setup screen (
Schedule
tab).
3.
Highlight the box under
Notify
heading and press the button.
You can toggle the entire list On and Off by highlighting
Notification
and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the button.
4.
Highlight
OK
and press the button to accept your changes.
NOTE
For the
Notify
action, the notify item you select should be enabled in the
Notification
setup screen
and the DVR should be registered in the RAS (Remote Administration System).
Fig. 52
Motion Detection Action 2 screen
Actions 2
1.
Highlight the desired box under the
PTZ
heading, and press the button.
Î
A list of PTZ presets appear.
2.
Select the preset position for each PTZ camera, where you want PTZ
cameras to move to whenever the DVR detects motion on the selected
camera’s input.
