Configuration
56
Siemens Building Technologies
Fire Safety & Security Products
03.2007
Actions 2
1.
Highlight the desired box under the
PTZ
heading, and press the button.
Î
A list of PTZ presets appear.
2.
Select the preset position for each PTZ camera, where you want PTZ
cameras to move to when the DVR detects video loss on the selected
camera’s input.
3.
Highlight the box under the
Spot Monitor
heading and press the button.
Î
A list of SPOT monitors and cameras appears.
Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects video loss
on the selected camera.
Î
You can save your
Video Loss
changes by highlighting
Save
and pressing
the button.
Î
Selecting
Cancel
exits the screen without saving the changes.
8.7.4 Text-In
screen
Highlight
Text-In
in the
Event
menu and press the button.
Î
The
Text-In
setup screen appears.
Fig. 56
Text-In Settings screen
Settings
The DVR can be set to react to text input from devices such as ATMs (Automated
Teller Machines) and POS (Point of Sale; i.e., cash registers). This screen allows
you to configure the DVR for each text-in device.
1.
Highlight the box under the
Setup
heading, and press the
button.
Î
Selecting the
Setup
heading changes all the parameters excluding
Port
settings of all the text input channels.
NOTE
The system performance might be affected when a large quantity of text inputs are detected from
several channels at the same time.
