manualshive.com logo in svg

Siemens SIRIUS 3RW5 series, Руководство по эксплуатации оборудования

Поделиться
Скачать
Siemens SIRIUS 3RW5 series Скачать руководство пользователя страница 71

State

Meaning

Flashes green / red

The "node flash test" was activated.

Off

No supply voltage (control supply voltage) available.

"BUS" LED

State

Meaning

Lights up green

Device performing data exchange.

Lights up red

Bus error

Flashes red

Configuring error

Off

• Device not performing data exchange (e.g. controller is in stop state).
• No supply voltage (control supply voltage) available.

LED "LINK", "LINK 1" and "LINK 2"

State

Meaning

Lights up green

There is a PROFINET connection between the 3RW5 communication module

1)

 

and a communication partner (e.g. IO controller).

Flashes green

The "node flash test" was activated.

Off

• There is no PROFINET connection between the 3RW5 communication 

module

1)

 and a communication partner (e.g. IO controller).

• No supply voltage (control supply voltage) available.

1)

For the 3RW5 PROFINET High Feature communication module, the assignment LINK 1 - Port 1 and 
LINK 2 - Port 2 applies.

7.2

Diagnostics via configuration software of the controller

When a certain fault occurs, the 3RW5 soft starter generates an interrupt as an IO device and 
sends it to the IO controller. The CPU of the controller then interrupts processing of the user 
program and calls up interrupt OBs automatically. The OB number and start information already 
provide you with information on the cause and type of fault.

Messages and diagnostics

7.2 Diagnostics via configuration software of the controller

SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004

71

Содержание SIRIUS 3RW5 series























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды