Technical Specifications
A-2
Point-to-point connection CP 440 Installation and Parameter Assignment
A5E00057742-02
A.1
Technical Specifications of the CP 440
General Technical Specifications
The following table contains the general technical specifications of the CP 440.
You will find the technical specifications of the function blocks in Section 6.7.
You will find further general technical specifications of the SIMATIC S7-400 in the
S7-400 and M7-400 Programmable Controllers, Module Specifications reference
manual, Chapter 1, “General Technical Specifications”, and the
S7-400 and
M7-400 Programmable Controllers, Module Specifications manual.
•
Electronic compatibility
•
Shipping and storage conditions
•
Mechanical and climatic environmental conditions
•
Information on insulation testing, safety class and degrees of protection
•
Standards, certificates and approvals
Technical Specifications
Dimensions W
H
D
29
290
210 mm
Weight
0.3 kg
Power input from backplane bus
Max. 0.36 A at 5 V, typically 0.33 A at 5 V
Power loss
Max. 1.9 W, typically 1.7 W
Indicators
LEDs for transmit (TXD), receive (RXD) and
interface fault (FAULT) Group alarm LEDs for
internal fault (INTF) and external fault (EXTF)
Diagnostic functions
•
Indicators for internal and external
faults
•
Diagnostics information dump
Yes, 2 red LEDs
Yes
Protocol drivers available
ASCII driver
3964(R) procedure
Transmission rate with the 3964(R)
protocol
300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 76800, 115200 bps
Transmission rate with the ASCII
driver
300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 76800, 115200 bps
Character frame
Number of bits per character (7 or 8)
Number of start/stop bits (1 or 2)
Parity (none, even, odd); at 7 bits per character,
only “even” or “odd” can be set for parity.
Содержание SIMATIC CP 440
Страница 10: ...Contents x Point to point connection CP 440 Installation and Parameter Assignment A5E00057742 02 ...
Страница 134: ...Diagnostics with the CP 440 8 16 Point to point connection CP 440 Installation and Parameter Assignment A5E00057742 02 ...
Страница 164: ...Accessories and Order Numbers D 2 Point to point connection CP 440 Installation and Parameter Assignment A5E00057742 02 ...