manualshive.com logo in svg

Siemens Moore 353, Руководство пользователя

Продукт Siemens Moore 353 - это современный контроллер, который обеспечивает надежное управление процессами в промышленности. Для ознакомления с функциями и настройками устройства необходимо скачать бесплатное Руководство пользователя на manualshive.com. Легко доступное и понятное руководство поможет вам освоить все возможности этого контроллера.

Поделиться
Скачать
background image

UM353-1 

Operation 

March 2003 

 

 

9-3 

9.2  CONFIGURATION MODE 

Configuration pushbuttons are located behind the flip-down door on the lower quarter of the faceplate.  Note that 
many of these buttons are used in both the normal operation mode and configuration mode, as described below. 
 

• 

ENTER/EXIT CONF

 - press to enter configuration when the station is 

in the normal operation mode or to exit configuration when in the 
configuration mode. 

• 

ALARM/STEP DOWN

 - has a dual purpose.  When in the normal 

operation mode, pressing the button will scroll through the alarm 
configuration parameters if the ALARM function block has been 
configured in the 

Active Loop

.  The alarm setting is displayed in 

engineering units and the % of range value will also be displayed on the 
setpoint bargraph by flashing a single segment equal to the % of range 
value.  If security clearance is satisfied, the parameters can also be 
changed.  See the ALARM function block description for details on the 
parameters. Press the ENTER/EXIT CONFIG button to return to the on-
line displays. 

 

When in the configuration mode, this button will step down to the next 
configuration level.  See the Configuration Overview section of this 
manual for details on typical levels of the configuration mode. 

• 

TUNE/STEP UP

 - has a dual purpose.  When in the normal operation 

mode, pressing the button will scroll through the controller tuning 
parameters and allow activating the AUTOTUNE algorithm, if 
configured for the loop controller.  If security clearance is satisfied, the 
parameters can also be changed. Press the ENTER/EXIT CONFIG button 
to return to the on-line displays. 
 
When in the configuration mode, this button will step up to the next configuration level. 

• 

TAG/<---

 - has a dual purpose.  When in the normal operation mode, pressing the button will scroll the 

complete tag name of the 

Active Loop

 in the alphanumeric display.  The tag will scroll one character at a time 

starting on the right (e.g. -------T, -----TI, ----TIC). 
 
When in the configuration mode, this button will provide a shift left function for configurable items (e.g. will 
shift the decimal point left). 

• 

QUICK/--->

 - has a dual purpose.  When in the normal mode this button will step through and access either 

previously selected configuration parameters in the quick hold blocks configured within the 

Active Loop

 (e.g. 

the HOLD value in 

QHOLD03

 which was labeled to display 

TEMP_LIM

 having a range of 300.0 to 600.0) or 

parameters defined as 

QUICKSET

15

 

in certain function blocks (e.g. RATIO). Press the ENTER/EXIT 

CONFIG button to return to the on-line displays. 
 
When in the configuration mode, this button will provide a shift right function for configurable items (e.g. will 
shift the decimal point right). 

• 

STORE 

- will store the configuration parameter to memory.  All configuration changes, except for QUICK, 

‘BIAS’, ‘RATIO’, and (quickset hold), require a store before the change is applied to the configuration.  
However, the QUICK functions will also require a store for the value to be placed in permanent memory, 
otherwise, it will only remain in battery RAM.  Values in battery will be used on a hot or warm start.  A cold 
start will use the value in permanent memory. 

                                                           

15

 

ALARM, TUNE, and QUICK are QUICKSET functions.

 

|

S T A T I O N

PB1

PB2

A

M

ACK

L
S

D

UNITS

ENTER

EXIT

CONF

TUNE

TAG

QUICK

STEP

UP

ALARM

STEP

DOWN

STORE

LOOP

S

P

CLOSE

OPEN

0

100

|

|

|

20

40

60

80

100

0

X03141S2

s

StockCheck.com

Содержание Moore 353



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Moore 353

Waters 2690 Quick Start Manual preview
2690
Бренд: Waters Страницы: 55
Paradox IP150 Programming Manual preview
IP150
Бренд: Paradox Страницы: 2
Vasco RF User And Installation Manual preview
RF
Бренд: Vasco Страницы: 32
Abra AK-10 User Manual preview
AK-10
Бренд: Abra Страницы: 16
SAI Connect Operation Manual preview
Connect
Бренд: SAI Страницы: 16
Hable One Starting Manual preview
One
Бренд: Hable Страницы: 3
Lattice Semiconductor HDR-60 User Manual preview
HDR-60
Бренд: Lattice Semiconductor Страницы: 26
Datavideo RMC-230 Instruction Manual preview
RMC-230
Бренд: Datavideo Страницы: 17
Datamax I-Class Installation And Operating Instructions Manual preview
I-Class
Бренд: Datamax Страницы: 22
Häfele 633.03.298 Quick Start Manual preview
633.03.298
Бренд: Häfele Страницы: 2
Häfele 633.03.298 Operating Instructions Manual preview
633.03.298
Бренд: Häfele Страницы: 24
DMX4ALL ArtNet-DMX Mux16 User Manual preview
ArtNet-DMX Mux16
Бренд: DMX4ALL Страницы: 21
HW Group HWg-SH3 Manual preview
HWg-SH3
Бренд: HW Group Страницы: 18
Haes ELAN HS-5100 User Manual preview
ELAN HS-5100
Бренд: Haes Страницы: 42
Pfeiffer Vacuum PT G28 500 Installation Instructions Manual preview
PT G28 500
Бренд: Pfeiffer Vacuum Страницы: 100
DSC PC5928 Quick Start Manual preview
PC5928
Бренд: DSC Страницы: 16
Viva VRM2 Instruction Manual preview
VRM2
Бренд: Viva Страницы: 9
Varian Turbo-V 250 series Instruction Manual preview
Turbo-V 250 series
Бренд: Varian Страницы: 79

Бренды по названию

Популярные бренды

Загрузить еще бренды