Siemens Moore 353, Руководство пользователя, Страница: 185 / 306

UM353-1 Data Mapping
March 2003 7-21
Extended Control Loop Status Word ( L# ECLS) - channel n+4/parameter 10
BIT Description Value Block Read/Write Output
0 Not Ack’d STANDBY 1-Not Acknowledged A/M R/W
1 Not Ack’d Override 1-Not Acknowledged A/M R/W
2 Not Ack’d Emergency Manual 1-Not Acknowledged A/M R/W
3 Not Ack’d HI Setpoint Limit 1-Not Acknowledged SPLIM R/W
4 Not Ack’d LO Setpoint Limit 1-Not Acknowledged SPLIM R/W
5 Not Ack’d User 1 Status 1-Not Acknowledged ODC R/W
6 Not Ack’d User 2 Status 1-Not Acknowledged ODC R/W
7 Not Ack’d Autotune W1 Warning 1-Not Acknowledged PID R/W
8 Not Ack’d Autotune W2 Warning 1-Not Acknowledged PID R/W
9 Not Ack’d Autotune W3 Warning 1-Not Acknowledged PID R/W
10 Not Ack’d Autotune E1 Warning 1-Not Acknowledged PID R/W
11 Not Ack’d Autotune E2 Warning 1-Not Acknowledged PID R/W
12 Not Ack’d Autotune E3 Warning 1-Not Acknowledged PID R/W
13 Transfer Autotune Parameters 1-Transfer PID W
14 PB1SW Input MD (*) 1-High, 0-Low PB1SW R/W
15 PB2SW Input MD (*) 1-High, 0-Low PB2SW R/W
* These bits indicate the status of the switch input MD. A write of a “1” will have the same effect as pressing and
releasing the button on the faceplate. If the action of the switch is sustained the switch will change position. If
the action is momentary, the switch will close for one scan cycle.
StockCheck.com