manualshive.com logo in svg

Siemens Moore 353, Руководство пользователя

Продукт Siemens Moore 353 - это современный контроллер, который обеспечивает надежное управление процессами в промышленности. Для ознакомления с функциями и настройками устройства необходимо скачать бесплатное Руководство пользователя на manualshive.com. Легко доступное и понятное руководство поможет вам освоить все возможности этого контроллера.

Поделиться
Скачать
background image

UM353-1 

Function Blocks 

March 2003 

 

 

3-9 

 

EMER

gency 

MAN

ual will be asserted when input EM is high (1). This causes the output to hold at the last position 

and permits the operator to adjust the manual value under the conditions listed for MANual.  It will also assert an 
EM MAN status, at the configured priority, to the operator display. 
 

STANDBY

 will be asserted when input TC is high (1).  This causes the A/M block output to track input TV thus 

placing the loop in a standby condition.  This feature can be used to enable one loop to track another for either 
redundancy applications or optional control schemes.  It will also assert a STANDBY status, at the configured 
priority, to the operator display. 
 

STATUS OUTPUTS -

 Output

  AS 

(Auto Status) goes high (1) when output O1 is the Auto input; output NA will 

go high when output 01 is not the Auto input, output MS goes high when the A/M switch is in the manual position; 
output ES goes high when the Emergency Manual switch is in the manual position; and SS goes high when the 
standby switch is in the Track Variable position.  Two LEDs on the display identify the position of the A/M switch. 
 

POWER UP 

- The A/M function block can be configured to power up under various conditions during a warm or 

cold start. If PU LAST has been configured as YES, during a warm start all outputs are initialized at previous values 
and the block will power up in the same condition (i.e. same A/M switch position).  When powering up in auto, the 
A/M block will execute in the manual mode for the first two scan cycles, allowing a controller block to track the last 
value.  When PU LAST is set to NO, the A/M block does not power up in last position during a warm start and will 
power up as configured by the POWER UP parameter, either AUTO or MAN. During a cold start, the A/M block 
will always power up as configured by the POWER UP parameter.  When the POWER UP parameter is used and 
the block powers up in MAN, the manual value can be set using the PU MAN parameter. 
 

C

lock 

W

ise 

MAN

ual configured as YES, the default position, will cause the manual value to increase with 

clockwise rotation of the knob. This feature is useful when clockwise rotation is desired to always open a value 
whether the valve is direct or reverse acting. 
 

EM

ergency

 MAN

ual, in firmware 1.30 and higher, allows the position of the A/M block Manual Switch (switch 1 

in the block diagram) and the associated light to be configured. When the EM input goes high (1), the Emergency 
Manual Switch (switch 2) switches to manual. If EM MAN is configured as YES, the Manual Switch (switch 1) and 
the indicator light will switch to the manual position, assuming that switch 1 is in Auto, and will remain in the 
manual position until the operator presses the A/M button or a command is received from an HMI to switch to Auto. 
The EM Switch (switch 2) will remain in the manual position until the EM status clears regardless of the position of 
the Manual Switch (switch 1). If the EM MAN parameter is configured as NO, the Manual Switch (switch 1) and 
associated indicator light will not change position when the EM input goes high (1). 
 

LOCK MAN

, in V2.4, can be set to YES to lock the loop in manual when Emergency Manual has been activated.  

The operator can switch the loop to Auto only when the EM condition has cleared. This feature is available only 
when the EM MAN parameter is configured as YES. 
 
The MAN ACCL parameter, in firmware 1.30 and higher, enables setting the acceleration rate applied to the pulser 
knob. It can be configured for Slow, Medium, or Fast.  Slow is the default and is consistent with firmware versions 
less than 1.30. 

 
PRIORITIES - 

The priority assigned to EM or SB PRIOR will affect the operation as follows (the outputs ES and 

SS will go high with all priority assignments, including 0, when event is active): 
 
 

1

. Bargraphs, event LEDs, and condition will flash.  ACK button must be used to stop flashing. 

 

2

. Bargraphs, event LEDs, and condition will flash.  Flashing will stop if ACK or if event clears. 

 

3

. Event LEDs and condition will flash. ACK button must be used to stop flashing. 

 

4

. Event LEDs and condition will flash. Flashing will stop if ACK or event clears. 

 

5

. Event LEDs and condition will turn on when event is active and off when the event clears. 

 

0

.  No local display action occurs when event is active. 

 

StockCheck.com

Содержание Moore 353



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Moore 353

Wasp B2000 Installation Manual preview
B2000
Бренд: Wasp Страницы: 16
Samsung SolarCell Remote Operating Instructions preview
SolarCell Remote
Бренд: Samsung Страницы: 2
Eaton ePDU G3 Installation & Quick Start Manual preview
ePDU G3
Бренд: Eaton Страницы: 2
Eaton ePDU G3 Manual preview
ePDU G3
Бренд: Eaton Страницы: 2
Eaton PowerXL DX-NET-ETHERCAT-2 Instruction Leaflet preview
PowerXL DX-NET-ETHERCAT-2
Бренд: Eaton Страницы: 3
OJ Electronics EFR Series Instructions Manual preview
EFR Series
Бренд: OJ Electronics Страницы: 8
OJ Electronics ETO2 Manual preview
ETO2
Бренд: OJ Electronics Страницы: 112
OJ EFS Series Instructions Manual preview
EFS Series
Бренд: OJ Страницы: 17
RadioMaster MT12 Quick Start Manual preview
MT12
Бренд: RadioMaster Страницы: 10
Xblue Networks X16 Quick Reference Card preview
X16
Бренд: Xblue Networks Страницы: 2
Interlogix TruPortal TP-ADD-1DIP Quick Reference preview
TruPortal TP-ADD-1DIP
Бренд: Interlogix Страницы: 9
I-Tork PDS Series Installation & Operation Manual preview
PDS Series
Бренд: I-Tork Страницы: 15
MGC RAXN-LCD Installation And Wiring Manual preview
RAXN-LCD
Бренд: MGC Страницы: 16
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Бренд: SOMFY Страницы: 112
Aruba S3500 Series Uplink Module Installation Manual preview
S3500 Series Uplink Module
Бренд: Aruba Страницы: 8
Lutron Electronics FS-5F Easy-To-Follow Instructions preview
FS-5F
Бренд: Lutron Electronics Страницы: 2
EVERSPRING SR801-2 Installation And Operating Instructions preview
SR801-2
Бренд: EVERSPRING Страницы: 3
elsner elektronik RF-MSG-ST IP53 Technical Specifications And Installation Instructions preview
RF-MSG-ST IP53
Бренд: elsner elektronik Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды