LITHOSTAR MODULARIS
4 - 25
Siemens AG
SPL1-130.840.02
Page 25 of 34
MODULARIS Uro Plus
Medical Solutions
Rev. 03
04.05
CS PS 24
Replacing switches
•
Remove the docking plate by removing the screws.
•
Remove the horizontal carriage cover of the SIREMOBIL:
- to do this, remove the six screws on the underside,
- expand the cover slightly and push it up (Fig. 28).
•
Replace the switch.
•
Reattach the horizontal carriage cover to the SIREMOBIL with the screws.
•
To support arm serial number 0050
- Reattach the docking plate so that it is seated on the threads of the screws. Tighten the
mounting screws with a torque of 18 Nm.
•
From support arm serial number 0051
- Tighten the plate (9/Fig. 29) with a torque of 18 Nm.
- Tighten the plate (8/Fig. 29) with a torque of 10 Nm.
If the docking plate was removed, the iso-center must be checked.
NOTICE
