MODULARIS Uro Plus
SPL1-130.840.02
Page 16 of 16
Siemens AG
Rev. 03
04.05
CS PS 24
Medical Solutions
6 - 16
Iso-center with ultrasound
Checking the distance: Side (23b/Fig. 23)
•
Press the
key twice (cross "+1" is not needed for this measurement).
•
Move the cross "+2" using the track ball onto the horizontal axis of the target line
(C/Fig. 23b).
•
Press the
key.
•
Move the cross "+2" using the track ball horizontally into the center of the white area of
the isocenter phantom.
•
If the center point of the white area (23b/Fig. 23) is not in the center
(permitted difference: + 0.5 mm from the center):
- Make a note of the value of D2 (with mathematical sign):
If the display of the ball (23b/Fig. 23) appears to the left of the isocenter, the correction
value must have a negative sign in front (to the right is a positive sign in front).
- Press the
key.
- Press the "F4" key.
- Press the "5" key.
- Select "MUP" with the track ball.
- Press the
key.
- Enter the password.
- Use the track ball to select the appropriate probe during image tilt.
- Press the
key.
- Enter half the value of D2 (H/Fig. 23).
Example:(H/Fig. 23):
D2 = 1,2 mm
⇒
Enter: -06 .
- Press the
key.
- Press the
key twice.
- Check the difference; if white area (23b/Fig. 23) is not in the center of the isocenter,
repeat the procedure.
•
Press the
key.
•
After adjusting the mount for the ultrasound probe, attach it on the mount (7/Fig. 1).
For each probe, check whether the adjustment in this position is also okay. Do not make
any change to the image tilt adjustment.
•
Following the check, store the parts in the appropriate transport cases.
German:
Bildkippung Sektor
Bildkippung Array
French:
Basculement d’image sondes sect.
Basculement d’image sondes conv.
English:
Image Tilt Sector
Image Tilt Array
Spanish:
Incl. imagen transd. sect mecanico
Inclinar imagen transductor curvo
