LITHOSTAR MODULARIS
4 - 15
Siemens AG
SPL1-130.840.02
Page 15 of 34
MODULARIS Uro Plus
Medical Solutions
Rev. 03
04.05
CS PS 24
High voltage connector
4
•
Remove the covers of the basic system unit and the shock wave head.
•
Remove the shock wave head (refer to the corresponding section).
•
Remove the cover at the charging unit above the high-voltage connection by removing
the screws (Fig. 13).
•
Remove the three clamps (N/Fig. 13) on the high-voltage connection.
•
Push the high voltage cable (HK/Fig. 16) in the direction of the shock wave head through
the corrugated tubing until the high-voltage connector is accessible (Fig. 15).
•
Remove the screws (S/Fig. 15) on the high voltage connector.
•
Push the metal housing (G/Fig. 16) above the high-voltage plug toward the back.
•
Open the cover (D/Fig. 16) of the high-voltage connector.
•
Remove the connection clamps (M/Fig. 17) in the old high-voltage connector.
•
Open the cable clamps (KS/Fig. 17) of the high-voltage connector.
•
Connect the new high-voltage connector; reconnect and secure it in the reverse order of
the removal.
•
Push the high-voltage cable back in the direction of the charging unit (in the basic unit)
and connect it (Fig. 13).
•
Mount the shock wave head assembly (refer to the corresponding section).
•
Attach all covers (refer to the corresponding sections).
Fig. 15
Fig. 16
Fig. 17
G
S
G
D
M
KS
