Siemens HB373AB.0, Инструкция по эксплуатации

Страница: 21 / 40

appliance door
NL
Remove from the device Insertion into the device
1.
Open the appliance door slightly.
2.
Press left and right on the cover (Fig. !).
3.
Remove shield (Fig. ").
When installing the center pane, make sure that the
arrow is located at the top right of the pane and
matches the arrow on the plate.
1.
Insert the center pane into the bottom of the holder
(Fig. !) and press on the top.
2.
Press both holders down (Fig. ").
4.
Loosen and remove the screws on the left and right
of the appliance door (Fig. #).
5.
Before closing the door again, clamp a folded
dishcloth (Fig. $).
Pull out the glass at the front upwards and place on
an even surface with the door handle downwards.
3.
Guide the front pane into the lower brackets (Fig. #).
4.
Close the front window until the two top hooks are
opposite the opening (Fig. $).
5.
Press against the underside of the front glass until it
audibly locks (Fig. %).
6.
Open the appliance door slightly again and remove the
dishcloth.
7.
Retighten the two screws on the left and
right.
8.
Place the cover and press it down until it clicks
audibly (Fig. &).
6.
Press the two holders of the central pane upwards, do
not remove them (Fig. %). Hold the diamond with one
hand. Remove the window.
Clean the windows with glass cleaner and a soft cloth.
9.
Close appliance door.
Attention!
Do not use the interior again until the windows have
been opened properly.
21