Siemens HB373AB.0, Инструкция по эксплуатации

Страница: 12 / 40

NL Before first use
Glass casserole
Institutions
For stews and casseroles.
heating me-
method
3D hot air:
Glass roasting pan
For casseroles, vegetable dishes and pastries.
Temperature
Length of time
maximum
1 hour
Clip extension rail
The extension rails can be used at any height. As many
pull-out rails can be fitted as there are free levels.
Switch off the device after the specified time.
When the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a
cleaning cloth.
Single pull-out system
The pull-out rails at level 2 allow you to pull the accessories out
further without them tipping over.
Pull-out system 2-way
Cleaning accessories
The pull-out rails at heights 2 and 3 allow you to pull the accessories
out further without them tipping over.
Clean the accessories thoroughly with soapy water
and a cleaning cloth or soft brush.
Pull-out system 3-way
The pull-out rails at height 1, 2 and 3 allow you to pull the accessories
out further without them tipping over.
- - - - - - - -
1 Operate device
k Before first use
Operate the device
You have already become acquainted with the controls
and their operation. Now we explain how to set up the
device.
For the first use k
Before you can use your new appliance, you must
make a few settings: In addition, clean the interior and
the accessories.
Switch device on and off
The function selector switches the device on and off. As
soon as you turn it to a position outside the zero position,
the device is switched on. To switch off the appliance,
always turn the function selector knob to the zero position.
First use
After the device is connected to the power, the time will
appear on the display. Set the current time.
Setting time
Set heating method and temperature
Make sure the function selector is in the zero position.
The time starts at “12:00 AM”.
1.
With the key
a
or @ set the time.
2.
To confirm on the key
v
tip.
The current time is shown on the display.
You can easily set the device with the function selection
and temperature knobs. The beginning of the
instructions for use states which heating method is
most suitable for which dish.
Example in the picture: top and bottom heat % at 190 °C.
1.
Set the type of heating with the function selector.
Cleaning interior and accessories
Before preparing food with the appliance for the first
time, clean the interior and accessories.
Cleaning the interior
To remove the smell of the new, warm up the interior
space. This must be empty and closed.
Make sure that there are no packaging residues, such as
granules of Styrofoam, in the interior and remove self-
adhesive tape in or near the interior. Before heating,
wipe the smooth surfaces in the cooking compartment
with a soft, damp cloth. Make sure the kitchen is
ventilated while the appliance is heating up.
Make the specified settings. In the next chapter you can
read how to set a heating method and temperature. ~"
Operating the device" on page 12
12