Siemens HB373AB.0, Инструкция по эксплуатации

Страница: 19 / 40

appliance door
NL
1.
Raise the rack at the front a little
s
and
remove
(
Fig. !).
2.
Then pull the entire rack forward and take it out
(Fig. ").
q appliance door
Device door
When properly maintained and cleaned, your
appliance will continue to look good and function properly
for a long time to come. Here we explain how to
to remove and clean the appliance door.
Remove and insert appliance door
To clean and disassemble the door windows, you can
remove the appliance door.
The hinges of the appliance door are all fitted with a
locking lever.
When the locking levers are closed (Fig. !), the appliance
door is secured. He cannot be removed.
When the locking levers for removing the appliance
door are folded open (Fig. "), the hinges are secured
and cannot be closed.
Clean the racks with soapy water and a
cleaning sponge. Use a brush for stubborn dirt.
Hanging racks
The racks only fit left or right. With both racks, make
sure that the bent rods are at the front.
1.
First insert the rack in the middle of the rear bus
,
until it abuts the wall of the cooking compartment,
then push it back
(
Fig. !).
2.
Then insert the rack into the front bus
„,
until it also
connects to the wall of the
interior space, and press down
... (
Fig. ").
:
Warning
Risk of injury!
■
If the hinges are not secured, they can close with
great force. Make sure that the locking levers are
always fully closed, or fully open when removing the
appliance door.
R
■
risk of injury!
When opening and closing the appliance door
the hinges move and can get stuck. Do not reach
the hinges with your hands.
Remove appliance door
1.
Press the appliance door completely open in the
direction of the appliance.
2.
Open both locking levers on the left and right (Fig. !).
3.
Close the appliance door as far as it will go
.
With both
grab hands left and right
ƒ
and pull it up slightly
(Fig. ").
19