Siemens HB373AB.0, Инструкция по эксплуатации

Страница: 14 / 40

NL
Time functions
3.
With key
a
or @ set the time.
3.
Again on the test
v
tip. The display shows the
end time
y
marked.
After a few seconds, the device starts to heat up. The
time counts down in the display.
4.
With the @ or . button
a
put the end at a later
time.
The time has elapsed
A signal sounds. The device no longer heats up. The
display shows the duration at zero.
Once the signal has ended, you can set a new cooking
time with the @ button.
When the dish is ready, switch off the appliance by turning
the function selector knob to the zero position.
Change and abort
With key
a
or @ you can change the duration at any
time. The change is accepted after a few seconds.
After a few seconds, the device takes over the settings.
The display shows the end time. As soon as the device
starts, the time will elapse.
To cancel the operation, set the cooking time with the
a
all the way back to zero. The appliance continues to heat
up without any time.
The time has elapsed
Set end
A signal sounds. The device no longer heats up. The
display shows the duration at zero.
You can set the time at which the time expires to a later
time. For example, you can place the food in the cooking
compartment in the morning and set it so that it is ready
in the afternoon.
Once the signal has ended, you can set a new cooking
time with the @ button.
When the dish is ready, switch off the appliance by turning
the function selector knob to the zero position.
Clues
■
Make sure that food does not remain in the cooking
compartment for too long and that it does not spoil.
Do not set an end if the operation has already
started. The cooking result would then no longer be
correct.
Change and abort
With the key
a
or @ you can change the end time. The
change is accepted after a few seconds. The end time
cannot be changed when the time expires. The cooking
result would then no longer be correct.
■
The end of the time can be delayed up to 23 hours and
59 minutes.
To cancel the program, use the . button to set
a
the end time all the way back to the current time plus
duration. The appliance starts to heat up and the time
counts down.
Example in the picture: It is 10:30 am, the set time is 45
minutes and the dish must be ready at 12:30 pm.
Small deviations from the image are possible.
1.
Set the type of heating and temperature or
setting.
2.
Press twice
v
touch and with button
a
or @ set the
time.
Set alarm clock
You can use the alarm clock when the device is turned
on and off. However, no duration or end time may be
set.
You can set a maximum of 23 hours and 59 minutes. Up
to 10 minutes, the alarm time can be set in steps of 30
seconds. After this, the time steps become larger, the
higher the value.
14