manualshive.com logo in svg

Siemens Drager medical Carina, Инструкция по эксплуатации, Страница: 112 / 144

Поделиться
Скачать
Siemens Drager medical Carina Скачать руководство пользователя страница 112

Disposal

112

Instructions for Use Carina SW 3.n

Disposing of the internal battery

z

Do not throw onto a fire, risk of explosion!

z

Do not open by force, risk of acid burns!

NiMH batteries are special waste:

z

dispose according to relevant national waste 
disposal regulations.

For information consult your environment agency, 
local government offices or appropriate waste dis-
posal companies.

Disposing of the inlet filter

Dispose of the filter with domestic waste.

Disposing of the device

At the end of the service life

z

Dispose of the device according to national 
waste disposal regulations,

or

z

have the device disposed of by a suitable waste 
disposal company.

For information consult your environment agency 
and local government offices.

For countries subject to EU Directive 2002/96/EC:

This device falls under the scope of EU Directive 
2002/96/EC (WEEE). It is not registered for use in 
private households, and may not be disposed of at 
municipal collection points for waste electrical and 
electronic equipment.
Dräger Medical has authorised a company to han-
dle legal disposal of this device. 
For further information please contact your national 
Dräger Medical Organisation.

Содержание Drager medical Carina

















































































































































Отзывы:

Нет отзывов