Siemens AlgoPilot B3Q661, Руководство по эксплуатации

Страница: 43 / 140

Operating instructions Œ•Ž
43
Building Technologies A6V10225450_b_en_--
Fire Safety 2017.09.07
TEST CONDITION per SECTION,
continued
Switching on
'Test condition'
operating mode
Perform the following steps to set all detector zones within a SECTION to 'Test condition' oper-
ating mode:
Step Action Result / Comment
1 Navigate
to the SECTION you want
using:
<Operate..>
t
<Browse..>
t
<Browse FIRE DETECTION..>
- or -
<Browse EXTINGUISHING..>
t
<Select SECTION
¯
>
The section functions are dis-
played
2 Press
softkey
<DETECTOR zone functions..>
3 Press
softkey
<All DETECTOR zones -> TEST>
Implementation messages
'
Implementing ...
' - and -
'
Implemented
'
Ending 'Test
condition'
operating mode
Perform the following steps to end 'Test condition' operating mode for all detector zones within a
SECTION:
Step Action Result / Comment
1 Press
button
<Isolation>
2 Select
one of the detector zones to be
reset to 'Normal operation'
Use the scroll keys on the display
3 Press
softkey
<Functions for sel. message..>
4 Press
softkey
<Select SECTION
-
>
5 Press
softkey
<DETECTOR zone functions..>
6 Press
softkey
<All DETECTOR zones
-> TEST OFF>
Implementation messages
'
Implementing ...
' - and -
'
Implemented
'