Siemens AlgoPilot B3Q661, Руководство по эксплуатации

Страница: 31 / 140

Operating instructions Œ•Ž
31
Building Technologies A6V10225450_b_en_--
Fire Safety 2017.09.07
Switching INDIVIDUAL ZONE OFF/ON (with time limit),
continued
Extending the
OFF status of an
individual zone
with time limit
·
If the time for which a zone is switched OFF is too short, it can be extended without the zone
having to be switched ON in the meantime.
·
The original time limit is replaced by the new one. After this newly defined time, the zone is
automatically switched back on.
Perform the following steps to extend the time for which a zone is switched OFF with a time lim-
it:
Step Action Result / Comment
1 Press
softkey
<Operate..>
The main menu appears on the display.
2 Press
softkey
<Browse..>
The sub-menu is displayed.
3 Press
softkey
<Browse
FIRE DETECTION..>
The AREAS menu is displayed
Use the scroll keys to select the area you
want.
4 Press
softkey
<Select SECTION
¯
>
The SECTIONS menu is displayed
Use the scroll keys to select the section you
want.
5 Press
softkey
<Select ZONE
¯
>
The ZONES menu is displayed
Use the scroll keys to select the zone you
want.
6 Press
softkey
<Zone -> OFF>
The sub-menu and the time input dialog ap-
pear on the display.
7 Enter time
'hh:mm'
using numerical keys
·
The cursor indicates the value to be en-
tered and moves on after input.
·
Maximum time limit = 18:00 hrs.
8 Press
softkey
<OFF with time limit>
to complete the input
Implementation messages
'
Implementing ...
' - and -
'
Implemented
'
Switching ON an
individual zone
+
The steps are the same as those described under "Switching ON an individual
zone" on page 29.
Mixing different
OFF statuses
·
You can switch a zone OFF with a time limit and then switch it to the OFF status without a
time limit or vice versa.
·
If the zone in question is already in the OFF status, you will need to repeat the steps taken to
switch it OFF. You have to decide which OFF status you want.