Chapter
6
Operating Instructions
Flexi Soft Gateways
168
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012664/XB29/2013-06-11
Subject to change without notice
Fieldbus gateways
All values are data type
Array of USINT
. Therefore the possible values range from
0
R
255.
The access rule for all instances is
GET
.
All these assemblies can be accessed via Implicit Message or via Explicit Message.
Consumed Assembly Instance (Originator—Target)
Instance ID
Description
Size [bytes]
Sent Data
5
Output data sets 1-5
10
20
30
40
50
One output data set
Two output data sets
Three output data sets
Four output data sets
Five output data sets
6
Output data sets 2-5
10
20
30
40
One output data set
Two output data sets
Three output data sets
Four output data sets
7
Output data sets 3-5
10
20
30
One output data set
Two output data sets
Three output data sets
8
Output data sets 4-5
10
20
One output data set
Two output data sets
9
Output data set 5
10
One output data set
All values are data type
Array of USINT
. Therefore the possible values range from
0
R
255.
The access rule for all instances is
GET/SET
.
All these assemblies can be accessed via Implicit Message or via Explicit Message.
Individual Data Set Transfer object
(73h — one instance per data set)
The vendor specific
Individual Input Data Set Transfer
object defines the attributes by
which the PLC can request either full input data sets or individual parameters within an
input data set.
Class attributes
Attribute ID
Name
Data type
Data value(s)
Access rule
1
Revision UINT 1
Reading
2
Max. instance
UINT
4
Reading
3
Number of instances
UINT 4
Reading
Instance attributes
Attribute ID
Name
Data type
Data value(s)
Access rule
1 to
n
(dependent on
data set definition)
Request input data
set specific data
Dependent
on data set
definition
0-255 Reading
General services
Service code
Implemented in Class
Implemented in Instance
Service name
01h Yes
Yes
Get_Attributes_All
0Eh Yes
Yes
Get_Attribute_Single
Notes
Tab. 139: Consumed
Assembly Instance
Notes
Tab. 140: Class attributes for
the Individual Data Set
Transfer object (73h)
Tab. 141: Instance attributes
for the Individual Data Set
Transfer object (73h)
Tab. 142: Individual Input
Data Set Transfer object
(73h) general services